Pressure Vessels

Ammonia Pressure Vessels

We supply ammonia pressure vessels.

Specifications:

1. Receiver : Receivers are available in 26 standard models with an internal gross volume of 4.4 to 329.1 cubic feet and a pump down capacity of 130 to 9740 pounds based on 80% of internal volume with liquid refrigerant at 90deg F. Ammonia or fluoridated receivers are made from carbon steel shell and carbon steel dished ends. Shells upto 300 mm (12") are made from seamless or welded pipes and above 300 mm, they are made from rolled plates. 

Standards : All receivers are manufactured and tested as per the following standards. : 
  • ASME Sec. VIII
  • ASME Sec. XI
  • IS:2825
Range : The diameter vary from 200mm(8") to 1200mm (48") and the lengths vary from 1.5 Meters(5') to 7.5 Meters (25'). 

2. Oil Separator : Our scrubber type oil separators are designed for vertical mounting in the compressor discharge line of commercial and industrial refrigeration systems to separate entrained oil from the discharge gas and a automatically return this oil to the compressor crankcase. Oil separators are made from Carbon Steel shell and carbon steel dished ends. Shells upto 300 mm (12") are made from seamless or welded pipes and above 300 mm. they are made from rolled plates. All oil separators are manufactured and tested as per the following standards : 
  • ASME Sec.VIII
  • ASME Sec.XI
  • IS:2825
Range :Two types of oil separators are available. One with automatic oil return and other without automatic oil return. The diameters vary from 200 mm(8") to 600mm (24") and lengths vary from 1 meter(3') to 1.5 Meter(5'). 

3. Vertical Accumulator : 
These are made from Carbon Steel / low temp. plate shell and carbon steel/low temp. steel dished ends. Shells upto 300mm (12") are made from seamless / welded pipes and above 300 mm, they are made from rolled plates. 

Standards : 
All accumulators are manufactured and tested as per the following standards :
  • ASME Sec. VIII
  • ASME Sec. IX
  • IS:2825
Range : The diameters range from 250mm(10") to 600mm (24") and lengths vary from 1 Meter(3") to 1.8 Meter(6"). 

4. Horizontal Accumulator : These are made from carbon steel / low temperature steel plate shell and carbon steel / low temperature steel dished ends. Shells upto 300 mm (12") are made from seamless / welded pipes and above 300mm, they are made from rolled plates.

Range : 
The diameters range from 250mm(10") to 600mm (24") and lengths vary from 1 Meter(3") to 1.8 Meter(6").
Looking for Pressure Vessels ?
© Super Refrigeration ( India ) Private Limited
 
Desktop Site Back to top