Refrigeration Valves

Weld In line Valve

“Super” Weld in Line Valves are designed for Heavy Duty Refrigeration Service including Ammonia & Non Corrosive Gases. They eliminate flanged or screwed connections Decreasing weight & simplifying installations. Valves are directly welded on the Pipe Line thereby eliminating leakage from flanged or screwed joints. The special design of these Valve allows flow in both directions & having low pressure drop.



Specifications-
  • Body- Cat steel.
  • Stem- CSMS series- Mild steel.
  •           CSTS series- Stainless steel.
  • Stem Sealing- CSMS series- Asbestos/non asbestos gland packing.
  •                      CSTS series- O ring neoprine.
  • Sealing Faces- CSMS series- Tin alloy.
  •                      CSTS series- Teflon.


Types:

  • CSMS (Cast steel metal seat) Port Size- 1/2" to 12" (15mm to 300mm) Conn. socket weld(Straight & Angle Form)
  • CSTS (Cast steel teflon seat) Port Size- 1/2" to 12" (15mm to 300mm) Conn. socket weld(Straight & Angle Form)

Stop Valve

The advanced design and Material of "Super" Stop Valves make them a far superior product especially in regards to non leakage of seat & bonnet, high external tightness , good possibility of insulation & back seating.



Specifications-
  • Body- Closed Grain Cast Iron
  • Stem- Mild Steel
  • Stem Sealing- Asbestos/Non Asbestos Gland Packing
  • Sealing Faces- Cims Series- Tin Alloy and Cits Series - Ptfe (Teflon)


Types:

  • Scims (Cast Iron Metal Seat) Port Size- 1/2" to 8" (15mm to 200mm) Conn. Flanged (Straight & Angle Form)
  • Scits (Cast Iron Teflon Seat) Port Size- 1/2" to 8" (15mm to 200mm) Conn. Flanged (Straight & Angle Form)
  • Scisc (Cast Iron Screwed Connection) Port Size- 1/4" to 1" (6mm to 25mm) Conn. Screwed (Straight & Angle Form)

    In line Valve

    “SUPER” weld in line valves are designed for heavy duty refrigeration service including ammonia & non corrosive gases. They eliminate flanged or screwed connections decreasing weight & simplifying installations. Valves are directly welded on the pipe line thereby eliminate leakage from flanged or screwed joints. The special design of these  valve allows flow in both directions & having low pressure drop.


    Technical Specifications:

    • Body- Cast steel
    • Stem- Mild steel
    • Sealing Faces- Tin alloy (White metal)
    • Stem Sealing-  Asbestos/Non asbestos gland packing
    • Type- SCSMS-SERIES (Cast steel metal seat)
    • Port size-  ½” TO 12” (15 MM TO 300 MM)- Straight and Angle form

     

    Check Valves

    “SUPER” Check valves are specially built for horizontal work and are of gravity closing piston type. All check valves are flanged and have a provision for manual operation with the help of manual opening stem. These check valves are noiseless and highly efficient in allowing flow in one direction only. These valves have metal to metal seat. These check valves prevent backward flow of refrigerant in liquid, discharge , suction and hot gas lines. These valves are installed in compressor discharge, suction and liquid line having low temperature applications.    


    Specifications:                            

    • Type-  CCIPT-SERIES (Cast iron piston type)
    • Port size-  1” TO 6” (25 MM TO 150 MM)- Straight  form
    • Connection-  Flanged

     

    In Line Check Valves

     We manufacture “super” In line check valves.

     

    Features:

    • Compact in size
    • Can be installed in any position ( horizontal or vertical)
    • Having low pressure drop
    • These valves close quickly and are reliable when flow reversal occurs
    • Body ,steel disc and spring enable them to withstand expected industrial refrigeration conditions
    • Can be installed with ammonia pumps and suitable for low temperature applications
    • ensures correct direction of flow
    • Prevent back condensation from warm evaporator to cold evaporator
    • Fitted with damping piston that makes the valve suitable for installation in lines where pulsation can occur

     

     

    Specifications:

    • Type-ICIDS-SERIES (Cast iron disc type)
    • Port Size- 1” TO 4” (25 MM TO 100 MM)- Straight  form
    • Connection- Flanged

    Safety Valves

    We also manufacture and export safety valves with the usage of high grade materials. These safety valves are procured from credible market vendors and therefore its authenticity cannot be questioned. They are made of high grade material and built with great precision and are normally set at 250 pounds per square inch pressure. The standard range of our safety valves is available in screwed type and in sizes from 1/2" & 3/4".

    Salient features:
    • Higher or lower rating can be set on request
    • Longer shelf life
    • Dimensional accuracy

    Dual Safety Valves

    Leveraging on our technical insight, we are engaged in manufacturing highly efficient Dual Safety Valve Manifolds. These dual safety valve manifolds are available in screwed type and in 1/2", 3/4" & 1" sizes only on which two safety valves are installed. Both the operative safety valves can be kept and can also be cut off any valve as per the requirement. In any case it cannot be cut, both the valves simultaneously which will always ensure safety of our clients plant.


    Features:
    • Longer shelf life
    • Dimensional accuracy
    • Versatile application areas

    Strainer Valve- Cast Steel- Weld In Line

    Gauge Valves

    Our diversified range of ammonia valves also includes specially designed and developed gauge valves. These gauge valves are available in screwed type only and in 1/2" size which show level of the liquid line through a special glass tube and are used in pairs. Our range of gauge valves confirms to the industry regulated norms.


    Features:
    • Various sizes
    • Versatile application areas
    • Dimensional accuracy.

    Needle Valves

    We supply needle valves. These needle valves are available in flanged as well as in screwed type. It covers from 1/4" to 1".

    Flow Indicators

    Our range of flow indicator is fabricated with the usage of high grade materials which are procured from authentic vendors. This along with the application of sophisticated technology makes our range of flow indicators widely appreciated in the industry. Customization of our flow indicator makes our range more specific for our clients.

    Salient features:
    • Various sizes
    • Versatile application areas
    • Dimensional accuracy

    Quick Closing Oil Drain Valve

    Constant Pressure Valves

    Liquid Level Gauge

    The unbreakable reflex glass liquid level gauge is designed for safe & positive visual indication of liquid level in vessels under high pressure & temperature conditions. The liquid chamber is one piece moulded metal body covered by glass. The light striking the glass in the liquid portion is absorbed by the liquid where as the liquid striking the glass in the vapour portion is reflected making the liquid appear as black and the vapour portion appear as white.


     Features & Applications:
    • Tempered by boro silicate glass, resistant to chemical thermal & mechanical shocks
    • Large chamber for boiling, flashing or surging liquids
    • Safety ball gauge valve provided
    • Option for frost free valve

     

    Suitable for monitoring liquid refrigerant & oil level for vessels as follows:

    • Receiver
    • Accumulator
    • Oil transfer drums
    • Low temp. accumulator
    • Low temp. oil transfer drums etc
    Available in following sizes:
    • 150mm (6")
    • 300mm (12")
    • 610mm (24")
    • 762mm (30")
    • 914mm (36")

    Weldable Flanges- M.S Forzed

    Float Valves

    Float valves are manufactured by using the best available materials in the market. The entire assortment is available in screwed type and in sizes from 1/2", 3/4" & 1". These float valves are used to control the level of liquid or gas. We can also customize our float valves in any size as per the details provided by our clients.

    Features:
    • Various sizes
    • Versatile application areas
    • Dimensional accuracy

    Tee Valves

    We also fabricate and export tee valves only in screwed types and in sizes from 1/2" to 1". The sizes an also be enlarged as per the requirement of our clients. Our assortment of tee valves flows in two directions in angular form. Alterations in the size of our tee valves keep the original attributes intact in it.

    Features:
    • Longer shelf life
    • Rust free
    • Application areas.

    Stop Valve- C.I (CITS_ Series)

    Needle Valve- Cast Steel- Weld In Line

    Looking for Refrigeration Valves ?
    © Super Refrigeration ( India ) Private Limited
     
    Desktop Site Back to top